E30 3-serie

Air grille holder small

∙ Original look
∙ 52mm/2" hole for one meter (not included)
∙ 3D printed
∙ Immediately ready for mounting

Service Interval / Oil Reset Tool

Instructions:

∙ Plug the Device into the 20 pin diagnostic socket of the car located in the engine compartment
∙ Turn ignition key to enable the board electronic but do not turn on the…

E30 Pop-out Windows Covers

Many miss these covers and unfortunately they are no longer available at BMW.
This is a perfect alternative, even the structure is simulated with this 3D printed version.They stay in place perfectly and…

Unlike others, these adapters are 3D printed with high quality resin print so they look like cast plastic (just like the OEM ones).

∙ They are ready to install.
∙ Nice way to install a 52mm/2″ gauge in your BMW E30.
∙…

Universal Gauges

∙ Very small size
∙ Simple and quick connection via included couplings
∙ High quality LED display
∙ Clear and legible display
∙ Choice of digital sensor in brass housing with M12x1,5 or M14x1,5…

2x BMW SWRA wiper blade holder

∙ Material: weather resistant PTEG
∙ Color: black mat
∙ Scope of delivery: 2x holder
∙ The wiper holders are attached to the wiper arm like the original and click into place…

BMW Sliding roof crank knob

∙ Material: UV resistant PTEG
∙ Color: black mat
∙ Fits firmly and without play
∙ Runs easily
∙ Assembly: as original
∙ Assembly instructions: Press the knob firmly onto the crankpin,…

2x BMW Reverse RDS covers

∙ Material: UV resistant PTEG
∙ Color: black mat
∙ Just like the original
∙ Scope of delivery: 2x cover (left + right)
∙ The covers are clicked on and and click into place automatically.

6x BMW E30 Fuel and brake line holder

∙ Material: weather resistant PTEG
∙ Color: black mat
∙ Holder for 2x fuel lines (front + return line) & 1x brake line
∙ Installation: on the bottom
∙ OEM ETK number: 16121177005…

3x E30 Fuel and brake line spacer

∙ Material: weather resistant PTEG
∙ Spacers for fuel lines / fuel line
∙ OEM ETK number: 16121176766
∙ Scope of delivery: 3 pieces (required quantity for E30)

Also suitable for:

∙ E30
∙ E46

12x BMW E30 SWRA stops + screws

∙ Material: UV resistant PTEG
∙ Color: black mat
∙ Contents of delivery: 6x long stop & 6x short stop (quantity required for E30) + 12 screws

5x BMW E30 M-Tech II Frontspoiler clamps

∙ Material: Weatherproof PTEG
∙ Color: black matt
∙ Assembly: like original
∙ OEM ETK number: 51712239711 (no longer available)
∙ Contents of kit: 5x clamp + 5x pin (needed…

18x BMW E30 M-Tech II Doorpanel clamps (old version, please also see the new version)

∙ Material: Weatherproof PTEG
∙ Color: black matt
∙ Assembly: like original
∙ OEM ETK number: 51162239735 (no longer available)
∙…

BMW E30 Fuel and Brake line kit

∙ Material: Weatherproof PTEG
∙ Color: black matt
∙ Assembly: like original, on the carfloor

Contents of the kit: (needed parts for E30):

∙ 6x E30 Fuel and brake line holder
∙ 4x E30…

4x BMW brake line holder for the trailing arm

∙ Material: Weatherproof PTEG
∙ Color: black matt
∙ Assembly: like original
∙ OEM ETK number: 34301161567 (no longer available)
∙ Contents of kit: 4x holder (needed amount…

SUPERSPRINT - FULL KIT 320I/325I/325IXORDER HERE YOUR COMPLETE SUPERSPRINT EXHAUST!Included in the kit:

∙ Supersprint Spaghetti ManifoldArticlenumber: 782401
∙ Stainless Steel
∙ 45mm diameter pipes

∙ Supersprint…

H&R Cupkit 35/35mm - 51mm

∙ Item number: 40664-1
∙ Manufacturer: H&R
∙ Drive: Sporty
∙ Installation location: front axle, rear axle
∙ Manufacturer designation: Cup Kit
∙ Lowering at the front approx .: 35 mm
∙…

H&R Cupkit 60 / 40mm - 51mm

∙ Item number: 31003-1
∙ Weight: 20.5 kg
∙ Manufacturer: H&R
∙ Drive: Sporty
∙ Installation location: front axle, rear axle
∙ Manufacturer designation: Cup Kit
∙ Lowering at the front…

E30 Wiechers Sport Strut Bars

Wiechers has been around since 1969 and motorsport has been a major focus from the start. The Wiechers experience speaks for itself!
A strut bar provides considerably more stability and prevents…

Coolant Temperature Gauge​

Cool accessory that every BMW E30, E24 and E28 fan should have. Digital LED temperature gauge with BMW console button appearance. Useful coolant temperature indicator that fits perfectly in BMW E30,…

Oil Temperature Gauge

Cool accessory that every BMW E30, E24 and E28 fan should have. Digital LED temperature gauge with BMW console button appearance. Useful oil temperature indicator that fits perfectly in BMW E30, E24 or E28…

Ambient Air Gauge

Digital LED ambient air thermometer with BMW console button appearance. Useful temperature indicator that fits perfectly in BMW E30, E24 or E28 console. Comes in handy when you don’t have OBC but still want to…

Volt Gauge

Digital LED voltmeter with stock BMW button appearance. Extremely useful voltage indicator that fits perfectly in BMW E30, E28 or E24 console. Shows battery voltage and alternator condition.

∙ Brand new high quality…

StrongFlex Rear trailing arm bush kit eccentric SPORT​

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Sport

Sport:

∙ Product ID: 036232A
∙ Hardness: 90ShA
∙ Set of 4

Fits:

∙…

StrongFlex Rear diff mounting bush

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Normal and Sport
∙ OEM: 33 17 1 135 242 / 33 17 2 228 425 / 33 17 1 090 948

Normal:

∙ Product ID:…

StrongFlex Rear Beam Mounting Bush

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Normal and Sport

Normal:

∙ Product ID: 031336B
∙ Hardness: 80ShA
∙ Set of 2

Sport:

∙ Product…

StrongFlex Rear Trailing Arm Bush

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Normal and Sport
∙ OEM: 33329058822 / 33329061945

Normal:

∙ Product ID: 031314B
∙ Hardness:…

StrongFlex Rear anti roll bar link to anti roll bar + arm bush

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Normal and Sport
∙ OEM: 33551126932 / 33551124375 / 33551131131 /…

StrongFlex Rear Anti Roll BarBush 12-19mm

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Normal and Sport

Normal:

∙ Product ID: 031313B
∙ Hardness: 80ShA
∙ Set of 2

Sport:

∙…

​StrongFlex Front lower arm bush M3 eccentric SPORT

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Normal and Sport

Sport:

∙ Product ID: 031369A
∙ Hardness: 90ShA
∙ Set of 2
∙…

StrongFlex Front Anti Roll Bar Bush 18-24mm

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Normal and Sport

Normal:

∙ Product ID: 031318B
∙ Hardness: 80ShA
∙ Set of 2

Sport:

∙…

Strongflex Front lower arm bush

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Normal and Sport
∙ OEM: 31129059288

Normal:

∙ Product ID: 031195B
∙ Hardness: 80ShA
∙ Set of…

StrongFlex Front anti roll bar link bush

∙ Material: POLYURETHANE (PUR/PU)
∙ To every product we add grease!
∙ Available in Normal and Sport

Normal:

∙ Product ID: 031525B
∙ Hardness: 80ShA
∙ Set of 2

Sport:

∙…

E30 Stabilizer bars set from H&R.

H&R Sway Bars are one of the easiest and most effective ways to improve the handling of your car. H&R anti-roll bars are made of high-tensile steel and forged steel ends, which can be adjusted to…

StrongFlex full kit

∙ 036103A
∙ Fits: E30 1982-1991
∙ Hardness: 90ShA
∙ Circuit use
∙ Material: POLYURETHANE (PUR/PU)
∙ Use grease with every product

Included:

∙ 2 x 031195A Front wishbone bush or 2 x 031369A…

StrongFlex full kit

∙ 036103B
∙ Fits: E30 1982-1991
∙ Hardness: 80ShA
∙ Street use
∙ Material: POLYURETHANE (PUR/PU)
∙ Use grease with every product

Included:

∙ 2 x 031195B Front wishbone bush or 2 x 031195A Front…

KONI Sport Shock Absorber BMW 3-Serie (E30) Sedan / Touring 325iX 1985-1992 - Front Axle (8641-1144SPORT)

∙ Article number: KD 86411144SPO
∙ Only fits the E30 325iX with 51mm struts
∙ Max length: 516mm
∙ Min. length:…

KONI Sport Shock Absorber BMW 3-Series (E30) Sedan / Touring / Cabrio / (E36) Compact / Z1 1982-2001 - Rear axle (80-2522SPORT)

∙ Article number: KD 802522SPO
∙ Suitable for any E30
∙ Max length: 549mm
∙ Min. length:…

KONI Sport Shock absorber BMW 3-Series (E30) Sedan / Touring / Cabrio / M3 (E30) 1982-1994 - Rear axle - L-max: -40mm (80-2522SP1)

∙ Item number: KD 802522SP1
∙ Suitable for any E30
∙ Shortened damper: -40mm
∙ Max length…

KONI Sport Shock absorber BMW 3-Series (E30) Sedan / Touring / Cabrio 1982-1994 / 3-Series (E36) Compact (excl. 323ti) 1994-2003 - Rear axle - L-max: -30mm (80-2641SPORT)

∙ Item number: KD 802641SPO
∙ Suitable for any E30
∙…

KONI Sport Shock Absorber BMW 3-Serie (E30) Sedan 318is / 323i / 325i / 324td / (E30) Touring / Cabrio / Z1 1982-1994 - Front axle (8641-1021SPORT)

∙ Article number: KD 86411021SPO
∙ Fits any E30 with 51mm struts
∙ Max…

KONI Sport Shock absorber BMW 3-Serie (E30) Sedan / Touring 318i (excl. M-Technik) 1982-1991 - Front axle (8641-1029SPORT)

∙ Fits any E30 with 45mm struts
∙ Placement: front axle

Are you a sporty driver, always looking for…

KONI Sport Shock absorber BMW 3-Series (E30) Sedan 318is / 323i / 325i / 324td / (E30) Touring / Cabrio / M3 (E30) 1985-1991 - Front axle - Lmax -20mm (8641-1210SPORT)

∙ Article number: KD 86411210SPO
∙ Fits any E30 with 51mm…

4x100 Spacers, push-through system with two-sided centering

Wheel spacers with double centering, vehicle as well as wheel side.

Please note: the 5mm version has no centering on the wheel side, due to the already existing…

EBC GD Grooved Brake Disc Set - Rear Axle

EBC's GD series can be recognized by wide moon-shaped grooves and fan-shaped spots. The GD discs are supplied in a black coating.

All EBC Premium brake discs are molded with a material…

EBC GD Grooved Brake Disc Set - Front Axle

EBC's GD series can be recognized by wide moon-shaped grooves and fan-shaped spots. The GD discs are supplied in a black coating.

All EBC Premium brake discs are molded with a material…

EBC brake shoe set

∙ Brake shoe sets consist of 4 brake segments
∙ Produced to OE specifications

Characteristics:

∙ Installation location Rear axle
∙ Thickness [mm] 42
∙ Diameter (mm) 228
∙ Support diameter [mm] 228

EBC brake drum set

Produced to OE specifications

Characteristics:

∙ Installation location Rear axle
∙ Diameter (mm) 229
∙ Support diameter [mm] 229

EBC standard brake discs - rear axle

EBC's replacement brake discs are made of G3000 cast iron with a material strength of 150 N / m2, with a strictly controlled surface hardness that may vary less than 20 HB. They are then…

EBC standard brake discs - Front axle

EBC's replacement brake discs are made of G3000 cast iron with a material strength of 150 N / m2, with a strictly controlled surface hardness that may vary less than 20 HB. They are then…

Bluestuff brake pads - Front axle

∙ EBC high friction pad for heavy duty street and rally / race use
∙ Maximum working temperature higher than Yellowstuff
∙ No friction loss with repeated heavy braking
∙ Easy to dose,…

Bluestuff brake pads - Rear axle

∙ EBC high friction pad for heavy duty street and rally / race use
∙ Maximum working temperature higher than Yellowstuff
∙ No friction loss with repeated heavy braking
∙ Easy to dose,…

Yellowstuff brake pads - Front axle

∙ EBC high friction brake pad for sporty street use with 15% better braking deceleration
∙ Can also be used for light rally / racing use
∙ Suitable for cars from 1200 kg
∙ Maximum delay…

Yellowstuff brake pads - Rear axle

∙ EBC high friction brake pad for sporty street use with 15% better braking deceleration
∙ Can also be used for light rally / racing use
∙ Suitable for cars from 1200 kg
∙ Maximum delay…

Redstuff brake pads - Front axle

∙ EBC “Ceramic” brake pad for sporty street use with 20-25% better braking deceleration
∙ Low, non-aggressive, dust release for cleaner wheels
∙ Suitable for cars up to 1500 kg
∙ No…

Redstuff brake pads - Rear axle

∙ EBC “Ceramic” brake pad for sporty street use with 20-25% better braking deceleration
∙ Low, non-aggressive, dust release for cleaner wheels
∙ Suitable for cars up to 1500 kg
∙ No…

Greenstuff brake pads - Front axle

∙ EBC brake pad for sporty street use with 15% better braking deceleration
∙ Low, non-aggressive, dust release for cleaner wheels
∙ Suitable for cars up to 1200 kg / up to 150 HP
∙ R90…